Does the DSP cause the RCD to trip?

As the DSP surge protection component is MOV type between L-N ,N-E, there may be a very small leakage current from Live to earth caused by the MOV normal operation. The RCD may see this as an imbalance between its live and neutral currents thereby causing the RCD to trip. Suggest fit the DSP before the RCD i.e. on the RCD's input terminal side. DSP is a device that is fitted in parallel across the L-N and earth.

Where should you install a DSP when you have an RCD installed?

Best to put the DSP before the RCD.

MultiGuard Surge Protector 1.8m lead, 5 Schuko Sockets

Home / Voltage Protection / Voltsafe / Single Phase: Plug/Socket – T3 / MultiGuard MGX-5SP – Surge Protector , 1.8m extension lead, 5 Schuko Sockets

Description

Spikes/surges are common in every house, office and building. The intensity varies and you never know when that killer spike will occur. Even milder spikes will gradually degrade the reliability of your equipment by repeatedly blowing microscopic holes in electronic circuitry until the equipment is rendered unreliable or non-functional. Data is particularly at risk. The Sollatek MultiGuard is a high quality 5 way strip that provides full surge/spike protection at an affordable price. The MultiGuard is available in different models.

Specification

Name	MGX-5SP
Stock Ref	92642102
Description	Multiguard MGX, 5 Way Schuko Switch, 230V
Socket	Sch
Plug	Sch
Sockets	5
Nominal Voltage	230V
Current Rating	16 Amps
MOV	1x20KD511
kA/Joules	6.5KA/220J
Switch	Yes
Cable	1.8m
Enclosure	MGX
M-S	No
USB	No

Model	Barcode
Multiguard MGX-5SP, 5Way Schuko + Switch	5060037800511

Downloads
Brochures
- Voltsafe Suppressor Brochure (3MB)
- Voltage Protection Catalogue (4MB)
- Voltsafe Multiguard Poster A3 (473KB)
Datasheets
- MultiGuard Range Datasheet (687kB)
Click on the question to get the full answer.

Does the DSP cause the RCD to trip?
As the DSP surge protection component is MOV type between L-N ,N-E, there may be a very small leakage current from Live to earth caused by the MOV normal operation. The RCD may see this as an imbalance between its live and neutral currents thereby causing the RCD to trip. Suggest fit the DSP before the RCD i.e. on the RCD's input terminal side. DSP is a device that is fitted in parallel across the L-N and earth.
Where should you install a DSP when you have an RCD installed?
Best to put the DSP before the RCD.
What MCB rating does one use for the Live wire on the DSP-1P?
It uses the B32 rating.
BLOGS

Are Power Surges and Spikes damaging your valuable electronics?
Did you know power surges and spikes account for 63% of all power disturbances? Power surges are caused by several things; the most common and powerful cause is lightning. Another way surges can be caused is by large appliances like air conditioners being turned on and off. Dangerous effects of Power Surges and Spikes Electrical […]

How to protect your valuable appliances from Lightning surges
Did you know that lightning is the single biggest cause of damage to and destruction of electrical and electronic equipment in homes? Due to the ever-changing climate and rising temperatures lightning strikes are becoming more and more frequent. Several things can happen in a storm. Some more catastrophic than others. The other issues are directly […]

Potential Damage Caused by Direct Lightning Strikes
Did you know that lightning is the single biggest cause of damage to and destruction of electrical and electronic equipment in industrial facilities, commercial buildings, and homes. Due to the ever changing climate and rising temperatures lightning strikes are becoming more and more frequent. This is the remanence of 2 distribution boards that have been […]

Related Products

ABOUT US

TECH SUPPORT

HOW CAN WE HELP?

CASE STUDIES

YOUR LOCAL PARTNER

FEEDBACK